歡迎來到東莞市皇盈自動化設備有限公司官網!
印后包裝系統方案提供商
Postpress packaging system solution provider
全國咨詢熱線:
0769-27283216
業務咨詢專線:
18929167579
NEWS CENTER 新聞中心

傳統的壓痕機是不是只能淘汰,只能人工操作???

發布人:管理者   發布時間:2021-04-07

       你了解的手動壓痕機是不是還停留在傳統人工放料的環節?新設備出來發現雖然全自動但是價格太貴!老設備也只能擱置!



手動壓痕機

機械手上新主圖

 

自動壓痕機

上新主圖2

適用范圍:適用于各類坑紙、瓦楞、膠片、海棉、灰板、吊牌的模切加工。

產品簡介:

1.采用PLC控制,觸摸屏人機界面,參數式設置及故障顯示;

2.前檔及邊檔可依紙張版面大小自由調整、調整方便;

3.送紙臺備有補臺裝置,可連續操作不停機;

4.光電多重檢視,入紙收紙均采用真空吸盤,無壓痕;

5.收紙臺備有板車,操作容易、省力,亦可加裝插紙計算器;

6.飛達部有軌道裝置,作版時可自由分開,方便作版;


Automatic die cutting machine:

Scope of application: suitable for all kinds of pit paper, corrugated, film, sponge, ash board, tag die cutting processing.

Product introduction:

1. PLC control, touch screen interface, parameter setting and fault display;

2. The front and side files can be adjusted freely according to the size of the paper layout for convenient adjustment;

3. The paper feeding table is equipped with a replenishing device, which can operate continuously without stopping the machine;

4. Photoelectric multiple inspection, paper in and paper out all adopt vacuum sucker, no indentation;

5. The paper receiving platform is equipped with a pallet, which is easy to operate and labor-saving, and can also be equipped with a paper calculator;

6. Feida part of the track device, version can be separated freely, convenient for version;

 

 那么問題來了!

1:手動的可以清廢、切線,但是速度慢、不安全,還需要養人工,一臺機器一個人

2:自動的可以切線確不方便清廢,還得養人工,速度是上去了,但總歸在人操作的哪部分就是慢下來了

      皇盈自動化設備有限公司就在全自動模切很貴,充分利用原有壓痕機不浪費的基礎上研發了加裝機械手的裝置,上料、下料、清廢等一系列功能全有


智能模切壓痕清廢機械手

  適用范圍:各類大小規格的紙張的模切,包括且不限于 80g書紙、120g~157g雙銅 紙、200 g~500g白板紙、600g~1200g灰板紙、瓦楞紙、0.2MM以上的膠片等。

產品簡介:

1.采用PLC控制,觸摸屏人機界面,參數式設置及故障顯示;

2.推規使用伺服電機,精度+/-0.2mm;

3.調試只需十分鐘,操作安全簡單,單人可同時看4-5臺機;

4.上料、模切、清廢、收料,四工位三軸設計,節省人力及存儲空間;

5.最大速度達1500-1800張/小時;


Intelligent die cutting indentation scrapping manipulator

Scope of application:

Suitable for die-cutting of paper of various specifications, including but not limited to 80g book paper, 120g-157g double copper paper, 200g-500g white board paper, 600g-1200g grey board paper, corrugated paper and film sheets (over 0.2mm).

Product introduction:

 Using PLC control, touch screen and man-machine interface, with parameter setting and fault display.

b. Using servo motor, the error range is +/-0.2mm.

c. It needs only 10 minutes to set up the machine. The operation is safe and simple. One person can operate 4-5 sets of machines at the same time.

d. Paper loading, die cutting, waste chip removal and material collection achieve three-axis design, which saves labor cost and space.

e. The maximum working speed can be up to 1500-1800 pcs of paper per hour.



壓痕模切清廢機械手

 undefined

 

 

單機智能壓痕清廢機械手詳圖

 undefined

 

 

 多工位智能壓痕清廢機械手詳圖undefined





多工位智能壓痕清廢機械手詳圖undefined
    

   

     您說這樣的智能壓痕清廢模切機械手實用不實用??

皇盈為廣大紙類印后客戶提供的壓痕機清廢機械手優質方案,希望能充分解決大家的人工,效率等問題,實現雙贏的目的!

国产原创AV在线,国产原创黄色视频,国产原创精品 正在播放,国产原创精品国产专区,国产原创精品巨作无遮挡